PRODUCT TYPE
DESCRIPTION & MAIN PROPERTIES:
●JOINTSEAL STRUCTURAL SILICONE SEALANT-N100 is one component, neutral solidification under room temperature, high modulus structural glazing silicone sealant.
Excellent weatherability, more than 30 years life-span under constant climate.
●Good endurance to high or low temperature; slight performance change between -40℃ ~ +150℃.
●High strength, high modulus and high flexibility.
●Good compatibility with other products manufactured by our company.
APPLICATIONS:
●Structural adhension and assembly for glass curtain wall projects.
●A single assembled component can be formed by sticking the glasses to the metal component directly to meet the design requirement of full or half hidden frame.
●Secondary adhension and sealing of insulating glass for structural assembly.
ADHESION:
●JOINTSEAL STRUCTURAL SILICONE SEALANT-N100 exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles); impregnated, varnished or painted wood and some plastics.
●Users must carry out own tests due to the great variety of substrates.
●The adhesion can be improved in many cases by pretreatment of the substrate with a primer.
DIRECTIONS:
●Application surface should be clean,dry and free from all contaminants,i.e,dust ,rust,grease etc.
●Cut the nozzle at an angle and apply the sealant with a standard caulking gun.
●Tool immediately to spread the sealant against all surface and give a smooth finish.
HEALTH & SAFETY:
●Avoid contact with eyes.
●Keep out of reach of children.
●Please dispose of empty cartridge correctly.
●It is a low hazard product.
LIMITATIONS:
●Not suitable for aquariums and in areas of food preparation.
●Not recommended for use with PMMA,PP,PE,Teflon,Bituminous,Wax or Paraffin.
COLOUR:
Clear,white,black,grey and other colours based on customer’s requirement.
PACKING:
●Inner packing:300ml/pc
●Outer packing:24pcs/carton
STORAGE:
12 months under dry condition below 25℃
TECHNICAL DATA SHEET:
Hardness (shore A) | Skin Over Time (Min) | Cure Time (Hours) | Tensile Strength | Density(g/cm³) |
36-40 | 25 | 48 | 0.9-1.1 | 1.4-1.41 |