Jointseal 243

DESCRIPTION & MAIN PROPERTIES: JOINTSEAL 243 ANAEROBIC ADHESIVE is a medium

viscosity and medium strength anaerobic pipe sealant. Thixotropic formulation reduces run-off and migration of the product before assembly.

APPLICATION：

Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil. 

Apply the adhesive with a 360 turn to leading threads of themale and female fittings.

Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.

Assembly parts and hold on for 24 hours at 22-24oC toensure full curing of jointing compound.

For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250oC and disassemble while hot. Then,

remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

COLOUR: Red,Blue

PACKING:

Inner packing:50ml/pc

Outer packing:120pcs/box

STORAGE:

12 months under dry condition below 25℃